VMD202 Vehicle Detector Probe - Electric-Gate Kits
Roll over image to zoom in Click on image to zoom
VMD202 Vehicle Detector Probe - Electric-Gate Kits

VMD202 Vehicle Detector Probe

VMD202

Got any questions? Give our team a call at 01202 725 680.

Style: VMD202 Entry/Exit Loop Detector-Loop detector for entering or exiting the property with 100ft of cable included.
Price:
£309.34

Tax included Shipping calculated at checkout

Description

This vehicle detector allows your gates to open automatically exit/entry and is ideal for retro-fit projects as it can be installed at the side of the driveway rather than underneath it.

Features

  • Ideal for retro-fit situations where standard ground loops cannot be installed underneath the driveway.
  • Sensing probe can be buried in the ground so it is not noticed by a potential intruder or vandals.
  • Compatible with a wide range of automation.
  • Has sensitivity adjustment to allow it to pick up metal objects from horses hooves to vehicles.
  • Has wide power supply options.
  • The low standby current of 250uA is great for solar power applications. If used in a location without power, one 9V battery will power the VMD202 for 6 months.

 

The maximum sensitivity settings provides a 12ft detection range that is dependant on the speed and size of the vehicle. With vehicles travelling over 5mph the radius may be extended. Sensitivity can be fully adjustable.

 

EMX's **NEW**  VMD202 Driveway Sensor with 50 ft lead and the vmd202-r programmer ( option for 100ft cable )

After three years of research, development and field testing, the all new VMD202 the most advanced single piece motion sensor in the market today.

The VMD202 installation and set up is simple and flexible.  The probe and its electronics are housed in a slim design that is buried next to a driveway. The 10 sensitivity settings are programmed by use of the VMD202-R and retained in non-volatile memory.

This means you can set the VMD202 then remove the remote and the settings remain the same on restart. All wires are connected to the gate operator input controls.

When the installer wants to adjust the VMD202, they unplug the jumper and plug in the remote, make the settings, remove the remote and replace the jumper for operation.

This allows one remote to be used on multiple installations, saving cost of multiple remotes. This feature also prevents unauthorized tampering of the settings. You may also leave the remote connected to the installation for convenient adjustment by others.

The low standby current of 250uA is great for solar power applications. If used in a location without power, one 9V battery will power the VMD202 for 6 months.

 

Technical Data

Power 6-41 VDC or 6-29 VAC (do not exceed 35 V peak)
Current Stand-by 250uA with VMD202-R removed 295uA with VMD202-R in-line
Relay Form C (SPDT) 1A@24VDC; 1A@120VAC
Detect Current 12mA
Operating Temperature -40oC - 82oC (-40oF - 180oF) at less than 96% relative humidity
Material ABS Plastic for VMD202-R PVC for Probe
Dimensions VMD202-R (3.0 x 0.9 x 2.75 in) Probe (1 x 24 in)
Probe Cable 5 wire direct burial PVC

You may also like

Recently viewed