Description
Key Features
The Kit Wheeler is a wheel-driven electromechanical opener for swing gates.
With unlimited opening angles and easy intallation the Kit Wheeler is a versatile system for gate automation.
This kit is ideal where traditional ram motors cannot be installed due to gates being fitted against a wall or other obstructions.
The motor will open inwards or outwards and the design of the fixing bracket allows for gates to open onto a sloping driveway up to 20cm in height difference.
Limited Warranty - 3 years on motors, 1 year on other components.
How do I tell if I need a left or right hand kit?
The motor is usually mounted on the inside of the property for security. With this in mind view the gates from inside the property looking outwards (the gates will normally, swing toward you). If the hinge appears on the left, you need a left-hand kit; if it's on the right you need a right-hand kit.
Product Details |
Kit Wheeler |
|
Opening speed m/min |
20 |
|
Frequency of use |
Domestic use only |
|
Opening direction |
Inwards or outwards |
|
IP rate |
44 |
|
Inbuilt aerial range |
30m |
|
Extra safety cells required |
Additional photocells recommended |
|
Limited warranty (Motor) |
3 Years |
Gate Stops
Most electric gate motors require a physical stop at the end of the opening and closing cycle. Gate Stops provide resistance to the motors so they know they've reached either the open or closed position. Without Gate stops the motors will over extend during their operation and the mechanism will eventually fail. When assessing your gate-way it is important to check you can install physical stops in both the closing and opening positions. A Common reason why gate stops cannot be installed is because of a sloping driveway or the gate is raised significanlty off the ground. If you cannot install something to provide resistance at either end of the motors cycle then you will require a specialised ram with in-built mechanical stops.
