Description
Key Features
- Ideal where long light gates are in place
- Unlimited opening angles
- Residential use only
- Easy and quick installation
- Inward/Outward opening
- Simple wiring & programming
Product Overview
The Kit myFlow electromechanical wheel operator kit for swing gates can be used where other motor types cannot.
The motors fix to the end of the gates so are free from post/pillar mounting restrictions.
The system will also work where gates open onto a sloping driveway up to a 12° incline (20cm rise).
Easy to install and a perfect solution where gates are tight against a wall or other obstructions.
Control board featuring: obstacle detection, simplified self-learning programming mode, adjustable settings of working times and force, delay time, pedestrian opening and slowdown.
Limited Warranty - 3 years on motors, 1 year on other components.
Kit Suitability
The Kit myFlow is a wheeled motor and requires a level surface to operate.
The wheeled motors will not work on stone or shingle driveways.
Gate Stops
Most electric gate motors require a physical stop at the end of the opening and closing cycle. Gate Stops provide resistance to the motors so they know they've reached either the open or closed position. Without Gate stops the motors will over extend during their operation and the mechanism will eventually fail. When assessing your gate-way it is important to check you can install physical stops in both the closing and opening positions. A Common reason why gate stops cannot be installed is because of a sloping driveway or the gate is raised significanlty off the ground. If you cannot install something to provide resistance at either end of the motors cycle then you will require a specialised ram with in-built mechanical stops.
