Description
- Max Weight: 1800kg
- Max Width: 40m
The FAAC 844 ER Z16 for rack applications
Ideal for demanding applications
• Electronic equipment can be fitted internally or remotely, allowing maximum flexibility during installation.
• Torque settings adjusted from the control board.
• Reliability and long life due to the internal mechanical components being immersed in a constant oil bath.
• Models are available for rack and pinion or chain drive
Designed to move commercial or industrial gates in the simplest, most convenient way.
The special twin-disk anti-crushing clutch, in an oil-bath, enables thrust adjustment from 0 to 110 daN.
As the gearmotor is non-reversing, no electric locks need be installed.
In the event of power failure the key operated release device makes it possible to open and close the gate manually.
Constant, complete oil-bath lubrication of mechanical components plus assembly in a high resistance pressure cast aluminium body ensure a long operating life.
Electronic programming is by 3 push buttons and an LED display making installation set up easy.
The control board is contained in a separate protective housing inside the operator and a patented cable gland protects against insect access.
Technical Specifications of FAAC 844
| Power supply voltage | 230v AC |
| Power | 650w |
| Current | 3.5 A |
| Thermal protection | 120 °C |
| Thrust | 0- 110 daN |
| Max. weight | 1800 kg |
| Use frequency (%) | 70 |
| Motor rotation speed | 1400 rpm |
| Operating ambient temperature | -20 °C to +55 °C |
| Dimensions (L x D x H) in mm | 275 x 191 x 387 |
| Protection class | IP 44 |
| Reduction ratio | 1:30 |
| Type of oil | FAAC HP OIL |
| Gate speed | 9.5 m/min |
| Limit switch | Magnetic inductive |
| Clutch | Twin-disk in oil-bath |