Description
- Motor Type: Sliding Tooth Cog
- Voltage: 230v
- Max Weight: 900kg
The FAAC 740 / 741 sliding gate kits are ideal for residential sliding gates with max weight of 500kg 900kg. It Includes a gear motor with built in electronic equipment and securing plate automates both new and existing sliding gates
• The electronic equipment inside the gearmotor facilitates and speeds up installation at a lower cost
• The control board enclosure has a “rotation” facility which helps with electrical wiring
• Anti-crushing protection is ensured by a control board directly controlling drive torque
• For extra safety an efficient obstacle detector is available
• The control board is simply programmed via 3 push buttons making set up at installation an easy process
• An internal protection housing covers the control board preventing damage from insects and moisture
• As the gearmotor is non reversing, no electric locks need be installed
• In the event of a power failure, a release device protected by a customised key allows manual operation of the gates
• Magnetic limit switch.
• Integrated encoder for reverse function on obstacle detection and accurate management of partial opening and slow down.
• Integrated740D electronic board
Technical Specifications of FAAC 740
| Power supply voltage | 230v AC |
| Power | 350w |
| Current | 1.5 A |
| Thermal protection | 140 °C |
| Thrust | 45 daN |
| Leaf max. weight | 500 kg |
| Use frequency (%) | 30 (SE) |
| Motor rotation speed | 1400 rpm |
| Operating ambient temperature | -20 °C to +55 °C |
| Dimensions (L x D x H) in mm | 295 x 225 x 325 |
| Protection class | IP 44 |
Technical Specifications of FAAC 741
| Power supply voltage | 230v AC |
| Power | 500w |
| Current | 2.2 A |
| Thermal protection | 140 °C |
| Thrust | 65 daN |
| Leaf max. weight | 900 kg |
| Use frequency (%) | 40 (SE) |
| Motor rotation speed | 1400 rpm |
| Operating ambient temperature | -20 °C to +55 °C |
| Dimensions (L x D x H) in mm | 295 x 225 x 325 |
| Protection class | IP 44 |